CMOS 2 input XOR gate

A person who has ultimate control over the affairs of the factory under Factories Act, 1948is called asA) Occupier(C) Chairman(B) Managing Director(D) ManagerAnswer is OccupierUnder the Factorie...
Below is a point-wise explanation discussing whether the successful determination of an alleged dominant player’s position in the relevant market is mandatory under Section 4 of the Competi...
Here’s point-wise analysis of the statement: “If competitors enter into an agreement in pursuance of a joint venture, they will not have to face the possibility of attracting any penal provisions unde...
In the rapidly evolving landscape of tablets, OnePlus has made a significant splash with its latest offering, the OnePlus Pad 2. This tablet is packed with impressive specs and features, positioning i...
If your client has received a notice for loan settlement from the District Legal Services Authority (DLSA), this means the matter is being referred for amicable settlement through Lok Adalat or ...
Speech by ReadSpeaker
thank you so much Sir for this easiest CMOS XOR layout tutorial,I have searched a lot of site but your one is the best.Can you please post VHDL Layout for me,I will be very thankful to you.
ReplyDeleteI already posted a tutorial on VHDL. Please follow the link.
ReplyDeleteHope this will help you.
http://things-for-students.blogspot.in/2011/12/vhdl-complete-tutorial.html
I think there is no way this gate is going to act like a xor gate.
ReplyDeleteWhen for example A and B' are 'high', The VSS will pass on to S1 BUT A' and B are then 'LOW', as result the VDD will also pass on to S1.
This may cause a too high current and your gate will probably explode.
I would check your circuit because now if A is LOW and B is HIGH or A is HIGH and B is LOW, it will create a powershortcut with result that your IC will explode.
ReplyDeleteI want steps of designing layout of xor in microwind
ReplyDeleteI want the steps of designing layout xor in microwind.Some body help me.
ReplyDelete